Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Share This Product:

Vehicle Fitment

2013 Yamaha YFZ 450
2012 Yamaha YFZ 450
2009 Yamaha YFZ 450
2008 Yamaha YFZ 450 SE II
2008 Yamaha YFZ 450 SE
2008 Yamaha YFZ 450
2007 Yamaha YFZ 450 SE II
2007 Yamaha YFZ 450 SE
2007 Yamaha YFZ 450 Bill Balance
2007 Yamaha YFZ 450
2006 Yamaha YFZ 450 SE
2006 Yamaha YFZ 450 Bill Balance
2006 Yamaha YFZ 450
2005 Yamaha YFZ 450 SE
2005 Yamaha YFZ 450
2004 Yamaha YFZ 450 SE
2004 Yamaha YFZ 450

Interchange Part No

5TG-81410-00-00
5TG-81410-01-00
5TG-81410-02-00
5TG-81410-03-00
5TG-81410-10-00

Specifications

Dimensions:
Interior diameter: 30 mm
Exterior diameter: 84 mm
Thickness: 12 mm
Length of wires stator to grommet: 180 mm
Length of wires grommet to plug: 980 mm
Length of pickup coil's wire to grommet: 95 mm

Other specifications:
Number of wires: 4
Number of plugs: 2
Number of pins: 4

Wire to wire resistance:
Alternator: White to Yellow = 0.3ohms +/-20%
Pickup: White to Red = 264ohms =+/-20%

Installation

Before installing your new stator:

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code then youﾒre original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010ﾒﾒ.

Details